- 追加された行はこの色です。
- 削除された行はこの色です。
*参照元 [#w2f3a02b]
#backlinks
*説明 [#s046159a]
-パス: [[linux-2.6.25/include/scsi/scsi_device.h]]
-FIXME: これは何?
--説明
**参考 [#n85debc9]
*実装 [#zbda078b]
struct scsi_device {
struct Scsi_Host *host;
-
--[[linux-2.6.25/Scsi_Host]]
struct request_queue *request_queue;
-
--[[linux-2.6.25/request_queue]]
/* the next two are protected by the host->host_lock */
struct list_head siblings; /* list of all devices on this host */
struct list_head same_target_siblings; /* just the devices sharing same target id */
-
--[[linux-2.6.25/list_head]]
/* this is now protected by the request_queue->queue_lock */
unsigned int device_busy; /* commands actually active on
* low-level. protected by queue_lock. */
spinlock_t list_lock;
-
--[[linux-2.6.25/spinlock_t]]
struct list_head cmd_list; /* queue of in use SCSI Command structures */
struct list_head starved_entry;
struct scsi_cmnd *current_cmnd; /* currently active command */
-
--[[linux-2.6.25/scsi_cmnd]]
unsigned short queue_depth; /* How deep of a queue we want */
unsigned short last_queue_full_depth; /* These two are used by */
unsigned short last_queue_full_count; /* scsi_track_queue_full() */
unsigned long last_queue_full_time;/* don't let QUEUE_FULLs on the same
jiffie count on our counter, they
could all be from the same event. */
unsigned int id, lun, channel;
unsigned int manufacturer; /* Manufacturer of device, for using
* vendor-specific cmd's */
unsigned sector_size; /* size in bytes */
void *hostdata; /* available to low-level driver */
char type;
char scsi_level;
char inq_periph_qual; /* PQ from INQUIRY data */
unsigned char inquiry_len; /* valid bytes in 'inquiry' */
unsigned char * inquiry; /* INQUIRY response data */
const char * vendor; /* [back_compat] point into 'inquiry' ... */
const char * model; /* ... after scan; point to static string */
const char * rev; /* ... "nullnullnullnull" before scan */
unsigned char current_tag; /* current tag */
struct scsi_target *sdev_target; /* used only for single_lun */
-
--[[linux-2.6.25/scsi_target]]
unsigned int sdev_bflags; /* black/white flags as also found in
* scsi_devinfo.[hc]. For now used only to
* pass settings from slave_alloc to scsi
* core. */
unsigned writeable:1;
unsigned removable:1;
unsigned changed:1; /* Data invalid due to media change */
unsigned busy:1; /* Used to prevent races */
unsigned lockable:1; /* Able to prevent media removal */
unsigned locked:1; /* Media removal disabled */
unsigned borken:1; /* Tell the Seagate driver to be
* painfully slow on this device */
unsigned disconnect:1; /* can disconnect */
unsigned soft_reset:1; /* Uses soft reset option */
unsigned sdtr:1; /* Device supports SDTR messages */
unsigned wdtr:1; /* Device supports WDTR messages */
unsigned ppr:1; /* Device supports PPR messages */
unsigned tagged_supported:1; /* Supports SCSI-II tagged queuing */
unsigned simple_tags:1; /* simple queue tag messages are enabled */
unsigned ordered_tags:1;/* ordered queue tag messages are enabled */
unsigned was_reset:1; /* There was a bus reset on the bus for
* this device */
unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
* because we did a bus reset. */
unsigned use_10_for_rw:1; /* first try 10-byte read / write */
unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */
unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */
unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
unsigned no_start_on_add:1; /* do not issue start on add */
unsigned allow_restart:1; /* issue START_UNIT in error handler */
unsigned manage_start_stop:1; /* Let HLD (sd) manage start/stop */
unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
unsigned select_no_atn:1;
unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */
unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */
unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */
unsigned last_sector_bug:1; /* Always read last sector in a 1 sector read */
DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
-
--[[linux-2.6.25/DECLARE_BITMAP]]
struct list_head event_list; /* asserted events */
struct work_struct event_work;
-
--[[linux-2.6.25/work_struct]]
unsigned int device_blocked; /* Device returned QUEUE_FULL. */
unsigned int max_device_blocked; /* what device_blocked counts down from */
#define SCSI_DEFAULT_DEVICE_BLOCKED 3
atomic_t iorequest_cnt;
atomic_t iodone_cnt;
atomic_t ioerr_cnt;
-
--[[linux-2.6.25/atomic_t]]
int timeout;
struct device sdev_gendev;
-
--[[linux-2.6.25/device]]
struct class_device sdev_classdev;
-
--[[linux-2.6.25/class_device]]
struct execute_work ew; /* used to get process context on put */
-
--[[linux-2.6.25/execute_work]]
enum scsi_device_state sdev_state;
-
--[[linux-2.6.25/scsi_device_state]]
unsigned long sdev_data[0];
} __attribute__((aligned(sizeof(unsigned long))));
*コメント [#y4405a29]